Flat-Flex® XT® Advantages:
Over 2X the life of standard belts
More joints across the belt for longer belt life
Up to 90% belt strength increase over standard Flat-Flex® belts
Clean-in-place, wash down design
Up to 78% open area for maximum air/liquid flow through
Smooth carrying surface lessens product damage
Available with C-Cure-Edge® loops
Easily joined using Flat-Flex® XT® joining clips or EZSplice® joining strands
USDA Accepted


Flat-Flex® XT® conveyor belt is available in the following belt meshes:
7.26 X 1.60 mm
12.7 x 1.83 mm
9.60 x 1.83 mm
9.60 x 2.08 mm

Edge Loop Types Available:

C-Cure-Edge®	Single Loop Edge (SLE)

Flat-Flex® XT® Quick Reference Chart

XT Code Reference	Pitch and Wire Diameter	Nominal opening between wires	Edge Loop Size	XT Space Width	Minimum Large Space Width	Average Belt Weight (Kgs/m²)	Maximum Tension per Joint - Kgf (N)	Minimum Transfer Outside Diameter (grooved)	Typical Open Area (%)
X426	7.26 x 1.6	5.66	7	22.23	50.8	2.9	6.8 (66.7)	19	71
X247	12.7 x 1.83	10.87	7	22.23	44.45	2.7	8.2 (80)	25	78
X327	9.6 x 1.83	7.77	8	22.23	57.15	3.1	8.2 (80)	25	74
X328	9.6 x 2.08	7.52	8	25.4	82.55	3.75	10 (98)	25	72
Width Tolerance(max. width 4267mm); 0 to 150 belt width: +/-0.8 150 to 900 belt width: +/-1.9 900 to 1500 belt width: +/-2.4 over 1500 belt width: +/-3.2

All dimensions are in millimetres (mm)

Component and Support Requirements for Flat-Flex® XT® Belts

COMPONENT QUANTITY CHART (SPROCKETS / BLANKS / SUPPORT STRIPS)
Number of XT spaces across belt	Drive shaft	Idler shaft		Belt supports
	Number of Sprockets	Number of		Wear Strips
		Sprockets	Blanks
3	3	2	1	2
4	4	2	2	3
5	5	2	3	4
6	6	2	4	5
7	7	2	5	6
8	8	2	6	7
9	9	2	7	8
10	10	2	8	9
11	11	2	9	10
12	12	2	10	11
13	13	2	11	12
14	14	2	12	13
15	15	2	13	14
16	16	2	14	15
17	17	2	15	16
18	18	2	16	17
19	19	2	17	18
20	20	2	18	19
21	21	2	19	20
22	22	2	20	21
23	23	2	21	22
24	24	2	22	23
25	25	2	23	24
26	26	2	24	25
27	27	2	25	26

Additional sprockets may be required on idler shafts exceeding 1200mm
PRE：Versa Link Conveyor Belt
NEXT：Flat-Flex Belt